Fiber Splicing, Termination and Testing Service

Fiber Splicing, Termination and Testing solution means we will implement for the fiber splicing, termination and testing as customer requirements.

Fiber Splicing, Termination and Testing solution means we will implement for the fiber splicing, termination and testing as customer requirements. Fiber Splicing & Termination, we inspect at least 3 or times before splicing & Termination.

Installation testing

  • Cable should be tested once it has been placed in the plant and prior to splicing to make sure that there has been no installation damage.
Yadanarbon Fibre Service Myanmar

Splicing & Termination Testing

  • Installation testing is usually done with an OTDR. Splice testing takes place after each splice to insure that a clean, low-loss connection was made. OTDR, local injection detection and/or profile alignment, can be used alone or in combination for splice testing.

Fault Cleaning

  • Fiber losses should be standard losses.
Yadanarbon Fibre Service Myanmar

Final acceptance testing

  • The usual post-installation testing method is to perform end-to-end OTDR testing. The results should be compared to the pre-installation test. It is highly recommended that an ongoing testing program be established after the system is powered up.